The screw type is one of many styles in the linear sliding table. Its structure is simple and clear. Friends who have seen it should understand it. The screw rod type is the most widely used type in the linear sliding table. It is composed of screw rod, support seat, sliding block, coupling, aluminum profile and other primary parts.

Because of its simple structure, the sliding platform module also has the feature of easy assembly. If you buy one, you don't need too much professional knowledge, and you don't need too many places. You can assemble the slide module in a few simple steps.

Sliding platform module has become the most widely used style. Of course, it is not only the feature of easy assembly, but also the driving structure of screw rod. This kind of driving structure has no dangerous speed limit. Unlike other styles, if the speed reaches the dangerous value, it will crack. However, the screw rod of slide module is very tough and will not crack.

The tenacity of the screw not only gives the linear sliding table no dangerous speed limit, but also applies to many heavy industry industries. It can operate under high load when the product weight is too large, that is, the bearing capacity of the linear sliding table screw is much higher than other types.

The sliding platform module is mainly composed of screw rod, nut, ball, raceway (ball returning device), nut seat, etc. The screw rod and nut are processed with arc spiral groove. When they are set together, the spiral raceway is formed, and the raceway is filled with balls. The balls roll along the raceway, and the ball return pipe makes a cyclic movement. The two ends of the ball return pipe also play the role of blocking the ball, so as to prevent the ball from falling out along the raceway.

The sliding platform module is a long metal product like a screw. The maintenance method of this relatively simple metal product is relatively simple. As we all know, the maintenance of car engine is to change the oil. And the ball screw is the same reason, it needs to use lubricants to maintain it, so how long is the maintenance time? Generally, according to your application condition, if you use it frequently, you should maintain it once a month. If you don't use it so closely, it's better to maintain it once every two to three months!

Two points should be paid attention to during maintenance, that is, the lubricant for maintenance should be selected according to the environment. The first point is to use lubricants with low base oil viscosity for low temperature applications, and the second point is to use lubricants with high base oil viscosity for high temperature, high load, shaking and low speed applications.